SeaGuard SSAS - Ship Security Alert System Technical Specification
ANTENNA UNIT
Terminal Identification
GPS Receiver
D+ Transceiver
Clock/Timer
Self Testing Circuitry
Internal Backup Battery
Communication Ports
Enclosure
Weatherproof
GPS Receiver
D+ Transceiver
Clock/Timer
Self Testing Circuitry
Internal Backup Battery
Communication Ports
Enclosure
Weatherproof
JUNCTION BOX
Circuitry
Clock
I/O Zones
External Display
Enclosure
Flame Resistant
Clock
I/O Zones
External Display
Enclosure
Flame Resistant
EXTERNAL COMPONENTS
Circuitry Alert Buttons
Supervisor Test Key Switch
Supervisor Test Key Switch
POWER SUPPLY
Permanent
CONNECTIONS
20m Cable
Connectors
Connectors
DISPATCH
Packaging
Freight
Instructions
Installation
Location & Fixing Kits
Activation Procedure
Certification
Freight
Instructions
Installation
Location & Fixing Kits
Activation Procedure
Certification
| COMPONENTS | SPECIFICATIONS | FEATURES | BENEFITS | |
| ANTENNA UNIT | Terminal Identification | Unique DCC number | The unique terminal identification and an individual password link the unit to a Solution Provider account and makes possible for the unit to be located and identified. It is impossible to use the unit with a different account or Solution Provider. | Personal, secure data transmission |
| GPS Receiver | U-Blox receiver, 16 channels, 2.5m accuracy | Continuous and global GPS coverage; coordinates are calculated every 2-10 seconds with an accuracy of 2.5m. Units can be located with extreme accuracy, at any time, anywhere in the world. | Accurate asset location | |
| D+ Transceiver | Global coverage. Short Burst Messages | Payload (size limit): - From terminal: 64 bits - To terminal: 200 bits (133 characters) The messages transmitted can be: - Standard reports: predefined (coordinates, speed, course, voltage, temperature) - Custom reports: re-configurable, can vary depending on the application. - Alerts: Triple burst (sent 3 times to ensure communication), they get to the user within 2 minutes. They can be transmitted to third parties like the Coast Guard, Police, etc. |
Reliable, dependable, real-time communication, low failure rate. Customised report to suit different needs. Effective, reliable, quick communication in emergency situations |
|
| Clock/Timer | Reports are sent at certain times of the day (for example 12am and 12pm) or at regular intervals of time depending on the script (from 1 to 96 reports per day). | Accurate, real time reporting | ||
| Self Testing Circuitry | PCB | The PCB gives the correct input to the transceiver and also protects the DMR from getting damaged by incorrect power supplies. This circuitry performs a diagnostic test and detects any faults. | System protected from damage, limits communication failure | |
| Internal Backup Battery | Rechargeable battery for emergencies. If the power supply is lost, the unit can still report for a week (6 hour reports). Also, when voltage reaches 10.5V, a low-voltage alert is triggered. | Safe, reliable backup system | ||
| Communication Ports | 4 input/output ports | 1. Alert buttons 2. Fault detection 3. Supervisor Test Key Switch 4. Spare |
Simple, easy to install system. | |
| Enclosure | RADOME: - Width 300mm - Height 165mm |
Sealed dome where all the components of the antenna unit are contained. It is a weather proof compartment that should be mounted and positioned where it has unobstructed view of the sky and satellites. | Internal components are protected. Resistant, long-lasting, robust design | |
| JUNCTION BOX | Circuitry | PCB | Motherboard of the system, controls the functioning of all the components. | Reliable, modern technology, low-failure rate. |
| Clock | When the alert button is pressed, the clock holds the signal for 30 seconds before sending it to the antenna. Also the time of the alert is recorded. | |||
| I/O Zones | 4 input/output zones | Where the alert buttons are connected; there can be up to 4 buttons, or 3 buttons and one supervisor key switch. | Several alarm buttons provide more security | |
| External Display | 5 LEDs | 1. Alert LED: 4 lights, one for each i/o port 2. Fault LED: 4 lights, one for each i/o port 3. Supervisor LED: flashes when system is in Supervisor Mode 4. Power LED: always green in normal operating conditions 5. Set up LED: used only during set up mode (installation) |
Noticeable and easy to understand display. | |
| Enclosure | Length 254mm |
Polycarbonate, flame resistant box that protects the internal components and connections. | Small, resistant, robust box, easy to mount anywhere | |
| EXTERNAL COMPONENTS | Security Alert Buttons | 2 buttons provided (up to 4 buttons can be connected) | Red button on silver-grey box. In case of emergency, the button(s) is pressed and the alarm signal is triggered and sent to the antenna unit to be transmitted. The buttons are small and easy to install anywhere so they can be hidden. | Alert triggered immediately and received within 2/3 minutes. Simple, easy to use system |
| Supervisor Test Key Switch | 1 key switch | Under Supervisor Mode, the system can be tested without triggering any alarms. Systems can be tested up to once a month to make sure all the components are still working, a message is sent to the server (not an alarm) | Units can be tested to make sure that the system is functioning correctly. | |
| POWER SUPPLY | Permanent | - DC between 12/24VDC - AC 220 AC |
Low power consumption | Cost-effective solution |
| CONNECTIONS | Cable/ Connectors | - 40 metre, 2 core - 10 metre, 3 core - 20 metre, 7 core |
- Security button cable (40 m, 20 m for each button), connects buttons to the interface box. - Supervisor key cable (10 m), connects the supervisor switch to the interface box. - Antenna cable (20m), connects the antenna unit to the interface box. |
Marine Standard IP56 braded cable, safe, long-lasting. |
| DISPATCH | Packaging | |||
| Freight | ||||
| Instructions | ||||
| Installation | ||||
| Location & Fixing Kits | ||||
| Activation Procedure | ||||
| Certification |
 |